
Licensed mold assessor serving every Lake Worth Beach neighborhood
Certified Mold Inspector in Lake Worth Beach, Florida
When you need a certified mold inspector in Lake Worth Beach, Florida, we send a state-licensed assessor to your door, not a salesperson. We test the air, check the walls, and tell you exactly what is growing and why. Whether it is a musty Historic District bungalow or a condo near Bryant Park, you get lab-backed answers in 24 to 48 hours.
What's included
What Our Certified Mold Inspection Includes
Every inspection includes a full walkthrough, moisture readings, thermal imaging, air and surface sampling, lab analysis, and a written report. Here is what is covered by default and what we can add on request.
Full Visual Walkthrough
We inspect every accessible area: attic, crawl space, bathrooms, kitchen, laundry, HVAC closet, and all living spaces. We look for visible growth, water staining, and conditions that support mold, and we document everything with photos.
Moisture and Thermal Mapping
A moisture meter and thermal imaging camera let us find hidden water behind walls and under floors. We record readings room by room so you can see exactly where the problem areas are and how severe they are.
Air and Surface Sampling
We collect air samples with calibrated pumps and surface samples with sterile swabs. Samples ship to an accredited lab under chain-of-custody, and we include an outdoor control sample so your indoor results have a baseline for comparison.
Lab Analysis and Report
The lab identifies mold species and spore concentrations. We compile everything into a written report with photos, moisture maps, lab results, and a recommended scope of work. Turnaround is 24 to 48 hours from sample collection.
Walkthrough and Q&A
We walk you through the report by phone or in person and answer your questions. If you are working with a remediation crew or an insurance adjuster, we can speak with them directly to make sure everyone is working from the same scope.
Post-Remediation Clearance
After remediation is complete, we can return to collect clearance samples and confirm that spore counts have returned to normal background levels. This is often required for real estate closings and insurance claim sign-off.
Service overview
What a Certified Mold Inspector in Lake Worth Beach, Florida Does
A certified mold inspector in Lake Worth Beach, Florida is a licensed professional who investigates moisture problems and identifies mold growth inside your home or building. We use a thermal imaging camera to find hidden water, a moisture meter and hygrometer to measure dampness, and a boroscope inspection camera to look inside walls without tearing them open. We collect air and surface samples, send them to an accredited lab, and hand you a written report with lab results, photos, and a clear scope of work.
Lake Worth Beach sits between the Intracoastal and the Atlantic, so humidity stays high most of the year and afternoon storms push water into roofs, windows, and crawl spaces. We see black mold infestation after summer rains, attic mold from poor ventilation, and crawl space mold under older homes near Mango Groves and Parrot Cove. If you have been searching for a mold assessor near me Lake Worth Beach Florida, we can be on-site the same day you call.
The service timeline
How Our Mold Inspection Process Works
The process flexes to the condition, but these checkpoints keep decisions clear.
Phone Intake
You call (833) 929-5837 and describe what you are seeing or smelling. We ask about recent water damage, roof leaks, AC issues, and any musty odors. Within minutes we schedule a same-day or next-morning visit, usually arriving within a 2-hour window.
On-Site Assessment
Our licensed assessor walks the property with a moisture meter, hygrometer, and thermal imaging camera. We check attics, crawl spaces, bathrooms, under sinks, and around HVAC units. A typical single-family inspection takes 60 to 90 minutes depending on square footage.
Sample Collection
We collect air samples with a calibrated pump and surface samples with sterile swabs. Samples go to an accredited lab under chain-of-custody. For homes over 2,500 square feet, we typically pull 3 to 5 air samples to cover each living zone.
Lab Analysis
The lab cultures your samples and identifies mold species and spore concentrations. Turnaround is 24 to 48 hours for standard analysis. We compare indoor counts to an outdoor control sample so you know whether your indoor air is actually elevated.
Report and Walkthrough
We deliver a written report with photos, moisture maps, lab results, and a recommended scope of work. We walk you through it by phone or in person, answer your questions, and explain what needs to be fixed and in what order.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal Imaging Camera
Detects temperature differences behind walls and ceilings to find hidden moisture without cutting into surfaces. Essential for locating slow leaks and condensation problems in Lake Worth Beach homes.
Moisture Meter and Hygrometer
Measures moisture content in drywall, wood, and insulation, and tracks relative humidity in the air. We use these readings to map affected areas and determine whether materials can be dried or need removal.
Boroscope Inspection Camera
A flexible camera that lets us look inside wall cavities, behind baseboards, and inside HVAC ducts without demolition. Critical for confirming mold growth in enclosed spaces.
Calibrated Air Sampling Pump
Draws a known volume of air through a spore trap cassette. Calibration ensures lab results are accurate and comparable to outdoor baseline samples.
HEPA Vacuum
Used during inspection and post-remediation to capture fine particles without releasing them back into the air. We use HEPA filters rated for mold spores.
Negative Air Machine and Air Scrubber
Creates negative pressure in a contained area to prevent spores from spreading during remediation. We verify containment setup as part of post-remediation clearance.
Containment Barrier and Plastic Sheeting
Isolates affected areas during remediation. We check that containment is properly sealed before and after work to confirm spores did not escape.
Use cases
When to Call a Certified Mold Inspector
These examples show how the service framework adapts rather than forcing every call through one repair.

Crawl Space Mold in Mango Groves
A property manager reported a musty odor in a ground-floor unit. Our inspection found crawl space mold covering roughly 200 square feet of floor joists and subfloor. The vapor barrier was torn and humidity in the crawl space was above 80%. → We wrote a scope that included removing the damaged vapor barrier, treating the joists with antimicrobial solution, and installing a new 6-mil vapor barrier. Post-remediation testing confirmed the odor source was eliminated and spore counts were back to baseline.
HVAC Mold Contamination in a Bryant Park Condo
A condo owner complained of allergy symptoms that got worse when the AC ran. Air samples collected at multiple returns showed elevated Cladosporium and Aspergillus counts compared to the outdoor control. Inspection of the air handler found mold growth on the evaporator coil and drain pan. → We documented the contamination with photos and lab results, and recommended a scope that included HVAC cleaning, coil treatment with antimicrobial solution, and replacement of the drain pan. Post-remediation air sampling confirmed spore counts had dropped to normal levels.
Problems we solve
Mold Problems We Solve in Lake Worth Beach
Most mold calls start with a smell, a stain, or a health concern. Here are the most common problems we diagnose and the consequences of leaving them alone.
Musty odor with no visible mold
We use a thermal imaging camera and boroscope inspection camera to find the source without tearing open walls. Air sampling confirms whether the odor is from active mold, and we write a scope that targets the actual problem.
Mold after a roof leak or storm
We inspect the attic and ceiling cavities, measure moisture content, and collect samples to confirm species. Our report tells you exactly what needs to be removed and what can be dried and treated, so remediation is scoped correctly.
Crawl space mold under older homes
We inspect the crawl space with moisture meters and thermal imaging, document the extent of growth, and recommend a scope that addresses both the mold and the moisture source, including vapor barrier repair and ventilation improvements.
HVAC mold contamination
We inspect the air handler, drain pan, and accessible ductwork, then collect air samples at multiple returns to check for elevated spore counts. If contamination is confirmed, we write a scope that includes HVAC cleaning and antimicrobial treatment.
Pricing process
Certified Mold Inspection Pricing
$300 - $650 for most residential inspections; $650 - $1,200 for larger homes or commercial properties
Square footage
Larger homes require more samples and more time on-site. A 1,200-square-foot condo might need 2 air samples, while a 3,000-square-foot home may need 5 or more to cover each living zone accurately.
Number of samples
Each air or surface sample adds to the lab fee. We recommend the minimum number needed for accurate coverage, so you are not paying for samples that do not add information.
Attic and crawl space access
Homes with difficult attic or crawl space access take longer to inspect. If we need to remove panels or use a boroscope to reach enclosed areas, that adds time but ensures the inspection is complete.
What makes a certified mold inspector in Lake Worth Beach Florida qualified?
A qualified inspector holds the Florida Mold Assessor License (MRSA) and follows the ANSI/IICRC S520 Standard. In Lake Worth Beach, that means they can legally perform mold assessments, collect samples, and produce a report that satisfies real estate and insurance requirements. Ask for the license number before you book.
How much does a certified mold inspector cost in Lake Worth Beach?
Most residential inspections in Lake Worth Beach run $300 to $650 in 2026, depending on square footage and how many samples we collect. A basic condo inspection with 2 air samples sits at the low end. A full single-family home with attic, crawl space, and 5 samples sits at the high end. Lab fees are included.
Is a licensed mold assessor required in Florida?
Yes. Florida law requires anyone performing mold assessment for compensation to hold a Mold Assessor License (MRSA) issued by the state. Inspectors who only test and report do not need a remediator license, but they must hold the assessor credential. We hold both, which gives us a fuller picture of what your property needs.
How do I verify a certified mold inspector in Lake Worth Beach?
Ask for the license number and check it against the Florida Department of Business and Professional Regulation database. You can also ask for proof of insurance and a sample report. A legitimate inspector will provide all three without hesitation. If someone cannot produce a license number, walk away.
Ready when you are
Schedule Your Certified Mold Inspector in Lake Worth Beach, Florida
Call (833) 929-5837 and we will schedule your inspection, usually same-day or next-morning. Every report is lab-backed, written by a licensed assessor, and delivered within 48 hours. No guesswork, no upsell.

Talk with the local team
Request Certified Mold Inspector
Call (833) 929-5837 and you will reach a real person, not a call center. We answer around the clock for emergencies and schedule standard inspections Monday through Friday. If you send photos of the affected area, we can often give you a ballpark price before we arrive.


