
Certified inspectors, moisture meters, and a written report in hours
Mold inspection in Lake Worth Beach, Florida that finds it all
A mold inspection in Lake Worth Beach, Florida is a room-by-room search for the water and spores behind musty odors, stained drywall, and attic discoloration. We serve homeowners, buyers, landlords, and property managers from Downtown to Hypoluxo Island. Our certified mold inspection Lake Worth Beach crews carry thermal cameras and moisture meters, so you get answers the same day, not a guess.
What's included
What is included in a mold inspection
Every inspection includes the full walkthrough, moisture readings, thermal imaging, and a written report. Air and surface sampling are included in our standard package. If you need additional samples, additional rooms tested, or post-remediation clearance testing, we quote those separately before we start so there are no surprises on the invoice.
Full visual walkthrough
Every accessible room, the attic, the crawl space, the garage, and the HVAC closet. We check for visible growth, water staining, efflorescence, and musty odors. We photograph each finding and note its location in the report.
Moisture and humidity readings
We take moisture meter readings at suspect walls, ceilings, and floors, and hygrometer readings to measure relative humidity. Anything above 60 percent RH is a mold risk in Florida, and we flag it in the report.
Thermal imaging scan
A thermal imaging camera shows temperature differences behind walls and above ceilings. That is how we find hidden moisture without cutting into drywall. We scan every exterior wall and the ceiling plane in suspect rooms.
Air and surface sampling
We pull air samples with a calibrated pump and take surface swabs or tape lifts from visible growth. Samples go to an accredited lab, and results come back in 24 to 48 hours with species and spore counts.
Written report with photos
Your report includes photos, moisture maps, lab results, and a plain-English summary. If remediation is needed, we include a scope of work with line items. You can hand it to an adjuster, an agent, or a contractor.
Phone walkthrough of findings
We go over the report with you by phone after you receive it. If you have questions about a specific finding or want to understand the lab numbers, we walk you through it. No charge for the follow-up call.
Service overview
What a mold inspection in Lake Worth Beach, Florida covers
A mold inspection in Lake Worth Beach, Florida is a non-invasive, top-to-bottom evaluation of your property that locates active mold growth, hidden moisture, and the conditions feeding both. We check the attic sheathing, crawl space joists, bathroom caulk lines, HVAC air handler, and every supply line behind the walls. A moisture meter confirms wet drywall; a thermal imaging camera shows the cold spots where condensation collects. We document everything with photos and lab samples, then hand you a written report you can use for insurance, real estate, or repairs.
Lake Worth Beach sits between the Intracoastal and the Atlantic, so humidity here runs high most of the year. A single slow supply-line leak under a kitchen sink can turn into a black mold infestation in under 72 hours. That is why a professional mold inspection Lake Worth Beach homeowners trust starts with moisture, not bleach. If you are buying a home near Bryant Park or renting in Mango Groves, a mold inspection for home buyers Lake Worth Beach can save you thousands before closing. We also handle commercial mold inspection for restaurants, condos, and offices along Lake Avenue.
The service timeline
How our mold inspection process works
The process flexes to the condition, but these checkpoints keep decisions clear.
Phone intake
We ask about the smell, the stains, the leak history, and the age of the building. Five minutes on the phone tells us whether you need a standard inspection or an emergency mold testing services call-out. We schedule same day or next morning, and you get a text when the tech is on the way.
On-site walkthrough
Our inspector arrives with a moisture meter, hygrometer, and thermal imaging camera. We check the attic, crawl space, bathrooms, kitchen, laundry, and HVAC closet. We photograph every suspect area and take moisture readings at each one. This usually takes 60 to 90 minutes for a single-family home.
Air and surface sampling
We pull air samples with a calibrated pump and take surface swabs or tape lifts from visible growth. Samples go to an accredited lab. If you need mold spore testing to confirm species, this is the step that delivers it. Lab results typically come back in 24 to 48 hours.
Report and scope
You get a written report with photos, moisture maps, lab results, and a plain-English summary. If remediation is needed, we include a scope of work with line items. If it is not, we tell you that too. No pressure, no upsell.
Walkthrough and next steps
We go over the report with you by phone or on-site. If you want us to handle the cleanup, we schedule it. If you want a second opinion or you are using another contractor, the report stands on its own. Either way, you know exactly what you are dealing with.
Tools & methods
Tools and methods we use on every inspection
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal imaging camera
Shows temperature differences behind walls and above ceilings, revealing hidden moisture without cutting into drywall. We scan every exterior wall and suspect ceiling plane.
Moisture meter and hygrometer
Confirms wet materials and measures relative humidity. Anything above 60 percent RH is a mold risk in Florida, and we flag it in the report.
Boroscope inspection camera
Lets us see inside wall cavities, under flooring, and above ceiling tiles without demolition. Essential for finding hidden mold behind finished surfaces.
Air sampling pump
Pulls calibrated air samples for lab analysis. We compare indoor spore counts to outdoor baseline to determine whether the indoor air is contaminated.
HEPA vacuum and air scrubber
Used during inspection cleanup and remediation to capture spores and fine particles. HEPA filters trap particles down to 0.3 microns.
Negative air machine
Creates negative pressure inside containment during remediation so spores do not escape into clean areas of the home.
Fogger and dry ice blasting machine
Fogger distributes antimicrobial solution into cavities and ducts. Dry ice blasting machine removes growth from wood framing and concrete without water or chemicals.
Use cases
When to schedule a mold inspection
These examples show how the service framework adapts rather than forcing every call through one repair.

Crawl space mold under a College Park ranch
A 1958 ranch had a musty odor in the living room that got worse in summer. The crawl space had visible mold on the floor joists and no vapor barrier. Moisture readings in the crawl space were above 80 percent RH. → We removed the growth with HEPA vacuuming and antimicrobial treatment, installed a 6-mil vapor barrier across the crawl space floor, and added cross ventilation. Indoor air samples dropped to outdoor baseline, and the odor did not return the following summer.
HVAC mold contamination in a Hypoluxo Island condo
A tenant complained of a musty smell every time the AC ran. The air handler closet had visible growth on the coil and insulation, and air samples inside the unit were three times the outdoor baseline. The unit had been vacant for four months. → We cleaned the air handler and accessible duct runs under negative pressure, replaced the damp insulation, and treated the coil with antimicrobial solution. Post-remediation air sampling came back at baseline, and the tenant renewed the lease.
Problems we solve
Mold problems we solve for Lake Worth Beach owners
Most mold calls start with one of these five problems. The earlier you catch it, the cheaper the fix. Here is what we see most often and what we do about it.
Musty odor with no visible mold
We use a thermal imaging camera and boroscope inspection camera to trace the smell to its source. Once we find the moisture, we sample the area and document the growth. You get a report with photos and a scope for removal.
Attic discoloration on roof sheathing
We test the sheathing, document the spread, and check ventilation. If removal is needed, we set up containment, HEPA vacuum the surfaces, and treat the framing with antimicrobial solution. We also recommend ventilation fixes so it does not return.
Water stain after a storm or leak
We inspect within 48 hours of the leak, take moisture readings, and sample the stained area. If growth is present, we scope removal and drying. If it is still just water damage, we tell you that and recommend drying only.
Crawl space mold under the house
We inspect the crawl space with a boroscope and moisture meter, document the growth, and remove it with HEPA vacuuming and antimicrobial treatment. We also install vapor barriers and recommend ventilation improvements.
Pricing process
What mold inspection costs in Lake Worth Beach
$250 - $600 for most residential inspections; commercial and multi-unit quoted per scope
Property size
A 1,200-square-foot condo takes less time than a 3,500-square-foot single-family home. Square footage drives the number of rooms, the number of samples, and the total inspection time.
Number of samples
Each air or surface sample costs money at the lab. A standard inspection includes two to four samples. Additional rooms, additional suspect areas, or species-specific testing add to the total.
Access difficulty
A crawl space with a small hatch or an attic with limited headroom takes longer to inspect safely. Difficult access adds time and sometimes requires additional equipment.
Questions before we arrive
Frequently asked questions about mold inspection in Lake Worth Beach

What does a mold inspection include in Lake Worth Beach Florida?
A standard inspection includes a full visual walkthrough, moisture readings with a moisture meter and hygrometer, thermal imaging of suspect walls and ceilings, air sampling, and surface sampling where growth is visible. You get a written report with photos and lab results, usually within 24 to 48 hours of sampling. Attic, crawl space, bathrooms, kitchen, laundry, and HVAC closet are all included.
How much is a mold inspection in Lake Worth Beach?
Most residential inspections in Lake Worth Beach run $250 to $600 in 2026, depending on square footage, number of samples, and whether attic or crawl space access is difficult. Commercial properties and multi-unit buildings are quoted per scope. We give you the price before we schedule, and there is no charge for the phone consultation.
How often should I get a mold inspection in Lake Worth Beach FL?
Every 2 to 3 years for a well-maintained home, and every year if you have had a leak, a flood, or a prior mold issue. After any water damage, get an inspection within 48 hours. If you smell musty odors or see discoloration, do not wait for the calendar. Call us and we will tell you whether it is worth a visit.
Can a mold inspection find hidden mold in Lake Worth Beach?
Yes. Hidden mold behind drywall, under flooring, and inside wall cavities is exactly what thermal imaging and boroscope inspection cameras are for. We combine those tools with moisture meter readings to map the wet zone, then take air samples inside the cavity if needed. Most hidden mold we find is tied to a slow leak or attic condensation.
Ready when you are
Book your mold inspection in Lake Worth Beach, Florida today
If you smell something musty or you just closed on a home you are not sure about, call us. We are licensed, insured, and we answer the phone. Same-day and 24/7 appointments available.

Talk with the local team
Request Mold Inspection
Call (833) 929-5837 and you will reach a real person, not a call center. We answer around the clock for emergencies and schedule standard inspections Monday through Friday. If you send photos of the affected area, we can often give you a ballpark price before we arrive.


