
Certified mold assessment with moisture testing and lab results
Mold Inspection Near Me in Lake Worth Beach, Florida
If you smell something musty or see dark staining on a wall, you need a mold inspection near me in Lake Worth Beach, Florida that actually finds the source. We run moisture meters, thermal imaging cameras, and air samples through an accredited lab, then hand you a written report you can use for repairs, real estate, or insurance. Same-day appointments are available across Lake Worth Beach and the surrounding Palm Beach County neighborhoods.
What's included
What Is Included in Our Mold Inspection
Every inspection package covers the full visual and instrument-based assessment, moisture mapping, and standard air and surface sampling. Additional samples, rush lab turnaround, and post-remediation clearance testing are available as add-ons. Here is what comes standard when you book with us.
Full Visual Walkthrough
Every accessible room, closet, attic, crawl space, and HVAC closet gets inspected. We note musty odors, discoloration, bubbling paint, and warped trim. This step alone catches most visible growth and points us toward hidden areas.
Moisture Meter Readings
We take calibrated readings at every suspect wall, floor, and ceiling. Readings are logged on a floor plan so you can see exactly where wet zones are. This is what tells you whether the problem is active or old.
Thermal Imaging Scan
A Milwaukee thermal imaging camera reveals temperature differences behind walls and under floors that indicate hidden moisture. We scan the full perimeter and any area with a history of leaks. This is how we find growth you cannot see.
Air and Surface Sampling
Standard package includes air samples and surface swabs from any visible growth. Samples ship same day to an accredited lab. Results include species identification, spore counts, and comparison to outdoor control levels.
Written Report With Photos
You get a report with spore counts, photos, moisture map, and a scope of work. It is written for homeowners, not contractors, so you can actually read it. Realtors, adjusters, and remediation crews can all work from the same document.
Walkthrough and Q&A
We walk you through the report line by line and answer every question. If remediation is needed, we explain what the scope means and what to expect. If it is not needed, we tell you that too, and what to do instead.
Service overview
What a Mold Inspection Near Me in Lake Worth Beach Covers
A mold inspection near me in Lake Worth Beach, Florida is a non-invasive, room-by-room investigation that locates active mold growth, hidden moisture, and the conditions feeding it. We start with a walkthrough of every accessible space, then use a moisture meter and thermal imaging camera to find water hiding behind drywall, under flooring, and inside cabinets. Air and surface samples go to an accredited lab, and you get a written report with spore counts, photos, and a clear scope of what needs to be fixed.
Lake Worth Beach sits between the Intracoastal and the Atlantic, so humidity here stays high most of the year and afternoon storms push water into places it should not be. In older homes around the Historic District and Mango Groves, that means crawl space mold, attic mold, and bathroom mold show up fast after a slow leak or a roof drip. If you have been searching for a local mold inspector near me Lake Worth Beach FL because a musty odor will not go away, we can usually get a tech out the same day to trace it.
The service timeline
How Our Mold Assessment Process Works
The process flexes to the condition, but these checkpoints keep decisions clear.
Phone Intake
We ask about the smell, the visible staining, any recent water event, and the age of the home. That five-minute call tells us what equipment to load and whether you need a full inspection or a targeted check. You get a flat price before we roll a truck.
On-Site Walkthrough
The tech walks the property with you, noting musty odors, discoloration, bubbling paint, and warped trim. We check every room, the attic, the crawl space, and the HVAC closet. This takes 20 to 30 minutes on a typical 1,800-square-foot Lake Worth Beach home.
Moisture and Thermal Mapping
A DeWalt moisture meter and a Milwaukee thermal imaging camera map wet zones behind walls and under floors. We mark each reading on a floor plan so you can see exactly where the problem is. This is the step that separates a real inspection from a visual glance.
Air and Surface Sampling
We pull air samples with a calibrated pump and take surface swabs from any suspect growth. Samples ship to an accredited lab the same day, and results come back in 24 to 48 hours. If you need rush results for a real estate deadline, ask and we will flag it.
Written Report and Walkthrough
You get a report with spore counts, photos, a moisture map, and a scope of work. We walk you through it line by line and answer questions. If remediation is needed, we can hand it straight to a licensed mold remediator.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal Imaging Camera
Reveals temperature differences behind walls and under floors that indicate hidden moisture. We use a Milwaukee unit on every inspection to scan the full perimeter and any area with a leak history.
Moisture Meter
Takes calibrated readings at suspect walls, floors, and ceilings. DeWalt meters give us numeric readings we log on a floor plan so you can see exactly where wet zones are.
Boroscope Inspection Camera
Slides inside wall cavities, behind baseboards, and under vanities to look for growth you cannot see from the surface. Essential for confirming hidden mold without cutting open drywall.
Hygrometer
Measures relative humidity in each room and in the crawl space or attic. Readings above 60 percent tell us the space is feeding mold growth even without a visible leak.
Calibrated Air Sampling Pump
Pulls a measured volume of air through a spore trap cassette. This is what gives us a quantifiable spore count per cubic meter, compared to an outdoor control sample.
HEPA Vacuum
Used during inspection cleanup and by remediation crews to capture fine spores without spreading them. We carry a HEPA vacuum on every truck for sample area cleanup.
Respirator Cartridges and Coveralls
Personal protective equipment our techs wear when inspecting confirmed growth areas. Disposable coveralls and respirator cartridges keep spores from spreading between rooms.
Use cases
When to Book a Mold Inspection
These examples show how the service framework adapts rather than forcing every call through one repair.

Attic Mold After a Roof Leak in the Historic District
A roof drip during a summer storm soaked the attic decking and insulation. By the time the homeowner noticed ceiling staining, the attic side had visible black mold infestation across roughly 80 square feet of decking and two rafters. → We sampled the growth, confirmed species, and scoped the remediation. The crew set a containment barrier, HEPA vacuumed the affected area, and treated the framing with an antimicrobial solution. Clearance testing confirmed the attic was clean.
HVAC Mold Contamination in Parrot Cove
A tenant complained of allergy symptoms that got worse indoors. The air handler closet had visible growth on the drain pan and insulation, and air samples in three rooms showed elevated spore counts compared to the outdoor control. → We documented the contamination and scoped the HVAC cleaning. The crew replaced the drain pan insulation, cleaned the air handler with an antimicrobial solution, and replaced the affected flex duct. Post-cleaning air samples came back within normal range.
Problems we solve
Mold Problems We Solve for Lake Worth Beach Homes
Most mold calls come down to a handful of recurring problems. Here are the ones we see most often in Lake Worth Beach, and what happens when they get ignored.
Musty odor with no visible mold
We use thermal imaging and a boroscope inspection camera to trace the odor to its source, then sample to confirm species and concentration. You get a documented location and a scope, not a guess.
Mold after a roof leak or storm
We inspect the attic decking, rafters, and insulation, sample any growth, and document the extent. The report gives your insurance claim and remediation crew a clear starting point.
Crawl space mold that keeps coming back
We map moisture across the crawl space, check joists and subfloor, and identify the source. Remediation typically involves containment, HEPA vacuuming, and an encapsulation coating to seal the space.
HVAC mold contamination spreading through the house
We inspect the air handler, drain pan, and accessible ductwork, then sample the air in multiple rooms. If contamination is confirmed, the report scopes the HVAC cleaning and any duct replacement needed.
Pricing process
Mold Inspection Pricing in Lake Worth Beach
$300 - $650 for most residential inspections; commercial and clearance testing quoted separately
Square footage
Larger homes take longer to inspect and usually need more samples. A 1,200-square-foot condo might need two air samples, while a 3,000-square-foot home with a crawl space and attic could need five or six.
Number of samples
Air samples and surface swabs are priced per sample. Standard packages include a set number, and additional samples are added if the inspection finds multiple suspect areas. More samples mean a more detailed report.
Crawl space or attic access
Crawl spaces and attics add time and require different equipment. If access is tight or the space is unusually large, the inspection takes longer and the price reflects that.
How much does a mold inspection cost near me in Lake Worth Beach?
Most residential inspections run $300 to $650 in 2026, depending on square footage and how many samples you need. A basic visual inspection with two air samples sits at the low end. Larger homes, crawl spaces, and multiple sample sets push toward the top. We quote a flat price on the phone before we schedule, so there is no surprise on the invoice.
Who offers mold inspection near me in Lake Worth Beach Florida?
We do, and we are one of the few local companies that performs assessment only, without selling remediation. That matters because Florida law separates the two licenses. Call (833) 929-5837 and we will confirm availability for your address, usually with same-day or next-day scheduling across Lake Worth Beach and the surrounding neighborhoods.
How long does a mold assessment take in Lake Worth Beach?
A typical single-family home takes two to three hours on site, and lab results come back in 24 to 48 hours. Larger properties, crawl spaces, and commercial buildings can run four hours or more. You get the written report the same day the lab results land, usually within 72 hours of the initial visit.
Does mold inspection near me include moisture testing in Lake Worth Beach?
Yes. Every inspection includes moisture meter readings and thermal imaging at no extra charge. We map wet zones on a floor plan so you can see where water is hiding behind drywall, under flooring, or around window frames. Air and surface sampling is included in the standard package, and additional samples are priced per sample.
Ready when you are
Book a Mold Inspection Near Me in Lake Worth Beach, Florida
If you smell something musty, see staining, or just went through a water event, do not wait. We run same-day and 24/7 inspections across Lake Worth Beach with flat pricing quoted before we roll a truck. Call (833) 929-5837 and we will get a tech to your address.

Talk with the local team
Request Mold Inspection Near Me
Call (833) 929-5837 and you will reach a real person, not a call center. We answer around the clock for emergencies and schedule standard inspections Monday through Friday. If you send photos of the affected area, we can often give you a ballpark price before we arrive.



